Superior image quality

• Synthetic focusing provides clarity throughout the entire field of view without requiring the user to set focal zones in advance
• Advanced Spatial Compounding and Speckle Filters provide excellent detail and contrast resolution for improved target and needle visualization during ultrasound-guided procedures

• 8 GHz ultra-wideband (UWB) high data rate radio provides exceptional real-time wireless imaging
• Multiple antennas on the transducer and system dedicated to reliable high speed image data transmission

Simpler, more efficient workflow

• Built-in transducer controls allow easy access to real-time operating functions
• Lightweight, ergonomic transducers are easy to prepare for sterile procedures
• Simplified user interface with fast access to most commonly used controls

• Wireless or wired DICOM connectivity
• Helps reduce the risk of contaminating the sterile field during an ultrasound-guided procedure

Easier, more flexible scanning

• Greater flexibility in positioning the system and the transducer because there is no cable tethering them together

• Freedom from cable weight or torque allows for greater ease in obtaining accurate transducer and needle positioning during point-of-care procedures

Improved mobility and control

• Quick boot up and shut down in less than 30 seconds
• System can operate on battery power, streamlining set-up at the patient bedside

• Wireless alert system helps keep track of transducer location
• Compact console design requires minimal space in patient room or procedure room

System Specifications

• System height: 335 mm (13.2 in ) 
• Width: 373mm (14.7 inches)
• Depth: 121 mm (4.8 inches)

• Weight: 4.8 kg (10.5 pounds)

System Console

• Small footprint mobile roll stand, table top mountable, or zero footprint wall-mountable
• Compact and lightweight module with high-resolution display and streamlined user interface

• AC or internal battery power
• Integrated dual transducer battery chargers

Monitor

• 15 inch (38.1 cm) high-bright LED LCD
• Resolution: 1024 x 768 pixels
• Energy saving display power management

• High contrast ratio
• Wide viewing angles

Imaging Modes

• B-mode
• Color Flow Doppler Velocity Mode

• Color Flow Doppler Power Mode

Control Mechanisms

• Intuitive and flexible user interface control mechanisms
• Real-time scanning controls accessible from:
• System console: dual rotary controls, side panel soft keys, trackball and trackball keys
  • Transducer slider and soft keys
  • Compatible external USB mouse

• System console
• Lower panel softkeys
  • Setup
  • Patient (New Patient)
  • Measure
  • View

• Side panel soft keys
  • B-mode and Color Flow Controls
    • Selection
    • On/off toggle for select functions
• Dual rotary controls
  • B-mode and Color Flow controls:
    • Selection
    • On/off toggle for select functions
    • Value adjustment for all controls
• Transducer slider and softkeys
• B-mode and Color Flow controls
  • Selection
  • On/off toggle for select functions
  • Value adjustment for all controls

Wireless Imaging

• Lossless digital image data high speed wireless transmission using a proprietary 7.8 GHz ultrawideband radio
• 500 MHz minimum bandwidth
• Scanning distance from transducer to system console: Up to 3 meters
• Multiple antennas in the transducers and system console combined with proprietary high speed antenna switching system provide optimal wireless link

• Wireless signal quality meter provides real-time feedback
• Average Noise Level display provides real-time quantified measure of wireless imaging signal quality
• Back channel Bluetooth® radio used for bidirectional control data communicatio

Hard Drive

• 16 GB solid state flash memory

• Approximately 100,000 image frames

System Input/Output

• Ethernet RJ45 (10BaseT/100BaseT) 
• (2) USB-A 

• VGA (15 pin D-sub miniature) 1024 x 768, 60 Hz

Power Supply

• Voltage: 100 - 240 V (50/60 Hz)
• Power consumption: maximum 0.08 kVA (may vary with configuration)
• Atmospheric pressure range: 700 – 1060 hPa (525 – 795 mm Hg) or up to 3050 m (10,000 ft)

• Ambient operating temperature range: +10° to +40°C (50° to 104°F)
• Humidity operating: 10 – 75%, non-condensing
• Maximum heat output: 273 BTU/hr

Image File Formats

• Export to USB-compatible storage media: PC-readable JPEG, MOV and XML (patient information)

Digital Patient Study Storage, Archiving, and Documentation Device

• Digital storage of still frames and clips
• Onboard patient study list
• Study viewing capability

• Viewing formats, full screen, quad screen, twelve image screen
• Optional Video Printer -- B/W printer (Sony UP 897)

System Applications

• Abdomen
• General Imaging
• MSK
• Nerve

• OBGYN
• Small Parts
• Vascular

 Pain Management Imaging

• Musculoskeletal (MSK)

• Nerve

 Women's Imaging

• Breast Imaging
• Gynecology

• Obstetrics

 Small Parts

• Breast 
• Deep
• General

• Superficial
• Thyroid

 Vascular Imaging

• Arterial
• Carotid
• General
• Venous Difficult

• Venous Lower Extremity
• Venous Superficial
• Venous Upper Extremity

DICOM

• DICOM-compatible system providing PACS connectivity
• DICOM Storage Class
• DICOM Storage Commitment
• DICOM Modality Worklist
• DICOM Echo

• Connectivity over ethernet
• Storage over USB-compatible storage media
• Wired ethernet networking
• IEEE 802.11 b/g wireless networking (Wi-Fi®)

Transducers

• Miniaturized ultrasound front-end and digital signal processing subsystem with high data rate ultra-wideband radio
• Cordless operation with adapter cable option

• Lightweight, ergonomic design
• Flat transducer base allows transducer to stand on end for single operator transducer cover placement

Wireless Transducer Technologies

• Multiple antennas integrated in transducers for optimal data link quality
• Transducer remote control softkeys: slider and two softkeys labeled for +/- control
• Auto-freeze automatically freezes image after timeout period during non-scanning to conserve battery life
• Auto-unfreeze automatically unfreezes image after sensing user grasp of a transducer that has entered Auto-freeze
• Transducer On/Off LED/index marker
• Up to 90 minutes of continuous scanning with fully charged transducer battery
• Low battery level warning messages
• Removable wireless transducer battery
• Transducer battery charger

• Dual charger integrated into system console
• Charging transducer batteries requires either of the following:
  • System console is connected to AC main power; or
  • System console batteries are charged
• LED indicator of charging activity on battery
• Indicator and readout of battery charge level on system console screen
• Transducer location
  • Audio tone for transducer status
  • Integrated Bluetooth radio aids in location tracking

Transducer Disinfection and Sterilization

• Transducer and transducer battery immersible for cleaning and disinfection

• STERRAD® 100S system sterilizable

Transducer

• Height: 34 mm (1.3 in)
• Width: 65 mm (2.6 in)
• Length: 153 mm (6.0 in)

• Weight (without battery): 172 g (6.0 oz)

Transducer Battery

• Height: 20 mm (0.8 in)
• Width: 41 mm (1.6 in)
• Length: 58 mm (2.3 in)

• Weight: 71 g (2.5 oz)